With repeated use, neon signs collect dirt particles, grease, insect bites, and other contaminants. It is essential to maintain neon lights’ brightness, color, and attractiveness.

Neon signs are a fun way to give your business a playful, artistic touch. However, they must be kept clean. We are often asked how to clean neon signs.

Neon signs are used to attract customers outside. To add more color and character to your environment, neon lights can be used indoors as decorative items.

Neon lights are extremely popular because of their vibrant colors, distinctive shapes, and excellent visibility. It is important to know how to clean neon lights properly. They are used frequently in storefront windows for advertising businesses and attracting customers. As with all lights, neon tubes will develop dirt, grime, and dust from airborne debris, as well as other detritus.

Signs and neon lighting that are not kept clean can look filthy. It is possible to prolong their life span and make their colors more vibrant by regular cleaning. You should already be familiar with how to clean neon light bulbs. Because they are delicate, neon lights require special cleaning methods.

Traditional neon signs are made of more fragile neon glass tubing. However, modern neon lights using LEDs are enclosed with protective plastic. Classic high beams can become hot to the touch when they are lit, while LED neon signs don’t.

If you are unsure how to clean neon signs then you have a few options. They are listed below:

  1. How to Get Rid of Dust

However, before you begin to handle the neon sign make sure it is turned off and disconnected. Allow the sign to cool down for a few minutes after you have done this. It can become hot after long hours of constant use.

Start dusting by using one feather duster. Use a soft, long bristled nylon brush to gently remove any remaining dust.

First, clean as much dust as possible.

Cleaning neon signs has never been easier.

  1. Get Rid Of Stains and Grime

For removing stains and filth, combine 12 cups of common ammonia in a plastic container with 12 cups of water. Next, you will need to use the mixture on a towel. Begin by gently rubbing the sign’s surface to remove any stains and filth.

Because of the polymer cover, it is easier to clean LEDs. You must turn off the power source and still lower your sign while you do wet cleaning.

Do you want to avoid using ammonia You can also substitute ammonia with a mixture of vinegar and baking soda.

  1. Keep It Off Properly

The neon signs should always be on to extend their lifespan. The LED neon sign that is constantly on or off will cause more burnout. Safety first, however, the sign must be removed before you can begin cleaning. The goal is to prevent the sign from being damaged or damaged during cleaning. After you have finished cleaning, make sure to turn off the sign. This will not only protect you but also make the soiled areas easier to see.

Avoid These Mistakes

When cleaning the sign, do not immerse it in water or a cleaning solution. Additional caution is necessary if the sign has block-out spray paint. Make sure to test the solution on a small corner of the sign before you wash it all.